Mini Split Installation Farmington

Enjoy Room‑By‑Room Comfort With Ductless

If you are tired of rooms that are too hot in summer or too chilly in winter, a ductless mini split can make your home feel comfortable again. Mini split installation Farmington homeowners choose often starts with one simple goal, keeping the spaces you use most at the right temperature without wasting energy.

At R.A. Biel Plumbing & Heating, Inc., we design and install ductless mini split systems that fit the way you actually live in your home. Our family has been serving the community for more than 30 years, and our NATE-certified technicians know how to match the right system to each space. We listen first, then recommend options that support comfort, safety, and efficiency.

Whether you are finishing a garage, adding a new room, or trying to fix one stubborn area, we are here to help you understand your choices. On this page, you can learn if ductless is a good fit for your home, see how our process works, and find out what to expect when you call our team.

Enjoy energy-efficient heating and cooling year-round—call R.A. Biel Plumbing & Heating, Inc. at (505) 278-5112 or reach out online to get started.

Is Ductless Right For Your Home

Many homes in Farmington and nearby neighborhoods are good candidates for ductless systems. Older houses with limited ductwork, manufactured homes, and add-on spaces like sunrooms or casitas often struggle to stay comfortable with traditional central systems. A ductless mini split brings heating and cooling directly into the rooms that need it most.

Instead of pushing air through long runs of duct, a ductless system uses compact indoor units mounted high on a wall or sometimes recessed in the ceiling. These connect to an outdoor unit through small refrigerant lines, so there is usually only a modest wall opening needed. Each indoor unit controls the temperature in its own zone, which helps reduce hot and cold spots.

If you currently rely on space heaters or window units, you may already know how noisy and inefficient those options can be. A properly installed ductless mini split can run much quieter and can use less energy than many older systems. Our goal is to help you decide how many zones you truly need and where they should go so you get comfort without unnecessary equipment.

Because our team has been working in local homes for decades, we are familiar with common layouts and challenges. We can walk through your home with you, look at the areas that never feel right, and talk through how ductless might solve those issues. You get clear information, not pressure.

Why Choose Our Family HVAC Team

When you invite someone into your home to install a new heating and cooling system, you want to feel confident in who you are working with. At R.A. Biel Plumbing & Heating, Inc., we are a family-owned company, three generations strong, and we have been rooted in this community for over 30 years. That kind of history means we plan to be here for you long after the installation is complete.

Our NATE-certified technicians bring advanced training in heating and cooling, including ductless mini splits. NATE certification is an industry-recognized standard that shows a technician has passed testing in real-world HVAC knowledge. For you, that supports accurate sizing, careful installation, and attention to details that can affect how quietly and efficiently your new system runs.

We choose premier products for the ductless systems we install, because we have seen how quality equipment can reduce problems over the long term. Our focus is on long-lasting, energy-efficient solutions, not quick fixes that leave you calling again in a year or two. We talk through options and help you understand why one setup might serve your home better than another.

Affordability matters, so we work to design systems that make sense for your budget while still following best practices and safety standards. We do not cut corners on materials or workmanship. As a family-owned company, we treat every customer like we would want our own family treated, with honesty, respect, and clear communication from start to finish.

Our Mini Split Installation Process

Knowing what to expect can make choosing ductless feel much easier. We follow a straightforward process that keeps you informed and respects your time and your home. From the first conversation through final testing, our team focuses on comfort, safety, and clean workmanship.

The process typically begins with an in-home visit. We ask about the rooms that give you trouble, look at your existing heating and cooling setup, and take measurements. During this visit, we also consider where indoor units could be placed for the best airflow and appearance, and where the outdoor unit could sit so it is accessible but not in your way.

Once we understand your home and goals, we design a ductless layout tailored to your space. That usually includes deciding how many zones you need, what capacity each zone requires, and how line sets will be routed between the indoor and outdoor units. We explain the options, answer your questions, and provide clear pricing information before any work begins.

On installation day, our technicians arrive on time and go over the plan with you again. They protect floors and nearby surfaces, then carefully mount the indoor units and run the refrigerant lines and drain lines through small wall openings. Outside, they place the outdoor unit on a stable surface and connect everything according to manufacturer guidelines and local codes.

After all equipment is in place, we pull a vacuum on the lines, charge the system as required, and test each zone. We check for proper operation, listen for unusual sounds, and make sure each remote or wall controller works as intended. Before we leave, we clean up our work areas and walk you through how to use your new system, including basic filter cleaning and how to adjust settings for comfort and efficiency.

Throughout the process, you work with the same family-owned company that has been serving local homes for more than three decades. Our NATE-certified technicians take the time to answer questions and make sure the job is done right the first time, so you can simply enjoy your upgraded comfort.

Comfort & Efficiency For Farmington Homes

Living in Farmington means dealing with warm summer days, cool evenings, and seasonal swings that can make some rooms uncomfortable. A ductless system gives you the flexibility to adjust each zone based on how you actually use it. You can keep bedrooms cooler at night, for example, without overcooling empty parts of the house.

Zoned control can also support more efficient energy use. Instead of conditioning your whole home just to fix one problem room, you can target only the spaces that need it. Many homeowners who add ductless to problem areas find that they rely less on older, less efficient equipment, which can help reduce strain on existing systems.

We have seen ductless work well in finished basements, bonus rooms over garages, home offices, workshops, and guest spaces around the Farmington area. These are the kinds of spaces that typically end up too hot in summer or too cold in winter when tied into a traditional system alone. By giving those rooms their own dedicated heating and cooling, you can make them truly comfortable year-round.

Because R.A. Biel Plumbing & Heating, Inc. uses quality products and focuses on careful installation, our goal is that your system provides reliable comfort for many years with normal maintenance. We are happy to talk about how ductless might fit into your long-term plans for your home, whether you are upgrading one room now or planning to add more zones later.

Take control of your home’s comfort with a modern ductless system—call R.A. Biel Plumbing & Heating, Inc. today at (505) 278-5112 or schedule your installation online.

Frequently Asked Questions

Will a ductless mini split work in my older home?

Yes, ductless mini splits often work very well in older homes, because they do not rely on existing ductwork. Our team looks at your walls, available space, and layout, then designs a system that fits your structure while aiming to protect your home’s character.

How long does mini split installation usually take?

Most single-zone installations are typically completed in about a day, while multi-zone projects can take longer depending on complexity. During our visit, we discuss estimated timing with you so you know what to expect and can plan around our work in your home.

How much mess should I expect during installation?

We work carefully to keep disruption low. Our technicians protect floors where they work, contain dust as much as possible, and clean up when the job is finished. There will be some drilling for line openings, but our goal is to leave your home neat and comfortable.

Can a mini split help lower my energy bills?

A ductless mini split can help reduce energy use compared to many older systems, especially if you currently rely on window units or space heaters. Actual savings vary with your home and usage, but zoning and efficient equipment give you more control over when and where you use energy.

What brands or products do you install for ductless systems?

We install premier ductless products chosen for reliability, comfort, and efficiency. During your consultation, we explain which options fit your home and why we recommend them. Our focus is on equipment that offers long-term performance and strong support rather than the lowest upfront cost alone.

Schedule Your Ductless Installation Visit

If you are ready to make every room in your home more comfortable, our family is here to help. R.A. Biel Plumbing & Heating, Inc. brings three generations of experience, NATE-certified technicians, and a commitment to quality, safety, and fair pricing to every ductless project.

When you call, we answer your questions, schedule a convenient visit, and walk through options that match your home and budget. There is no pressure, just clear information from a local team that treats you like family and stands behind its work in Farmington and nearby communities.

Call (505) 278-5112 to talk with our team and schedule your mini split installation visit.